Category: News

Why Flat Is The Favorite Material For Many Toronto flat Roofing Company Clients

No Comments

Why Flat Is The Favorite Material For Many Toronto flat Roofing Company Clients

There are many materials out there that you can choose for flat Roofing. While some people prefer asphalt, others go for wood, concrete, stones, glass, plastic and many other available choices
depending on the environment where one lives. A reputable Toronto flat roofing company will take you through a review of all these choices and tell you the advantages and limits of each.

Majority of business owners however like Flat roofing for the many benefits it offers. Here
are some of the good things a person may derive from using this material on
their houses:

Long-term investment

Unlike most other materials, Flat roofing, under normal conditions, take a very long
time before they require replacement. You will be making long term investment
of about 50 or so years when you go for this kind of roofing.

Easy installation

Installing a Flat roof by a professional Toronto flat Roofing Company is easier compared to most other materials. However this does not mean that you go ahead to fix it yourself or call some inexperienced person to do it; that may expose you to dangers and probably unnecessary extra costs.

What this means for you is that you get to pay lower fees to a professional roofer
for doing the job. Moreover, it saves you the time especially if you intend to
make use of the building very soon.

Cheaper maintenance

Flat roofs have lower cost of maintenance compared to other choices. The only
replacement that one has to make is one or two nails or bolts when a strong
storm hits. There is also very little damage that can be exerted by water on
such roofs and this can be minimized by making it sloppy enough to avoid water


Wide range of choices

The sizes, shapes and color of Flat roofing vary. This means that your freedom of
choice is wider with these than with other materials like asphalt. Moreover,
you can also choose whether you want iron, copper, steel, and zinc among other
high end materials.

Many people also love copper due to the fact that it acquires green color after some
period, making it look even more beautiful. Using a reduction-based technology,
you can also restore the brown color, but this might require you to spend a
little bit much.


Most commercial areas have sets of rules concerning the construction features and
materials that new property owners may pick. These are usually formed with the
intent to enhance appearance of an estate and bring uniformity. Majority of
these accept Flat roofing, so long as it’s not reflecting too much sun rays through
other people’s windows.

Disposal value

Every flat roofing item looses value as the period of use increases. However, unlike other
items that cannot be resold, Flat roofs can be disposed off at a price; they are
required in plenty by factories and so you can make a good deal out of the
scrape if you find the right buyer.

In this sense, installing a Flat roof by a Toronto flat Roofing Company is one of the best choices people have. To ensure that you enjoy maximum benefit from your property, allow only a qualified Toronto flat roofing company to conduct repairs and installations for you.

Categories: News

Type Of Roofing Material Offered By Toronto Roofing Companies

No Comments

Type Of Roofing Material Offered By Toronto Roofing Companies

It is important for a homeowner to do a little research on the type of roofing material they should go for. It is also essential to evaluate the pros and cons of the different materials so that you ensure you get what is needed. However it might be hectic deciding what material to go for therefore below is some of the types of materials Toronto Roofing Companies offer.


This is a roofing system made from metal piece or tiles. Metal roofing are mostly appropriate for homes with especially flat or steep rooflines. Metal roofing can be made out of copper, steel or aluminum. Metal roofing has a higher durability chance and also serves as a good reflector of solar energy thus reducing cooling costs. Also metal roofs have high insulation rating. The prices have a wide range therefore it is advisable to seek out consultation and compare prices.

Asphalt shingles

This happens to be the cheaper option in roofing material as it is highly used by many people and is easily available. Asphalt shingles are light weight therefore apply little pressure on the structure. However financially appealing and convenient asphalt shingles might be it offers minimal insulation and a shorter lifespan as compared to other materials. Because of the materials used to make asphalt it cannot be recycled. However if you have a low budget it is the most convenient.

Wood shingles and shakes

Wood shingles are known to be more appealing because of their natural appearance. Wood shingles can last 30 to 50 years if you decide to go with hardwood such as cedar or redwood. Shingles are machine cut while shakes are cut by hand although both can be easily available and can be purchased from different types of hardwood. However wood shingles and shakes might be hectic to maintain.

Slate shingles

Slate is the most expensive roofing material of them all. However expensive it is a good slate can last up to 100 years. Slate shingles are durable, easy to maintain, to repair and also recycle and it adds a striking appearance to the house. If your budget can not allow you the luxuries of real slate then wary not because you can go for a synthetic product available that is similar in appearance only difference is it will have a shorter life span. However due to its dark color, slate absorbs sunlight therefore increment of your hitting bill might be potentially high.

It is advisable to know the different types of roofing that are available to you and to what advantages or disadvantages they present beforehand. Your budget will also determine what kind of roofing material to go with as you will realize the more expensive the material the more the lifespan and durability. Toronto Roofing Companies are efficiently equipped with both material and skill to handle all kinds of roofing work.

Categories: News

Commercial outlet box installation-advice by a commercial electrician

No Comments

Commercial outlet box installation-advice by a commercial electrician

We’re gonna show how to put these things together the easy way.
Hopefully we have to fish everything behind a steel grate basically in this style of commercial receptacle and and in this stuff the code is you always use a 20 amp one.
There were a little bit more heavy-duty than what you might see in a house.

What you’re not gonna see on these usually is some little hole at the back where you can just kind of insert the wires and tighten it down. It does get wrapped around the screw. what you’ll see here though is a little hole one side of this a little more complex one side smaller.
This is what basically corresponds at a green ground. The black wire is always going to be this one and then here if you’ll notice these a color-coded one the white one’s gonna be kind of the brass color.
What you do is you stick the wire in this hole and you’re gonna have a fair amount of it stripped off to get this to go right it in the hole it don’t fit and then pull it around a screw and then hit that with the impact driver and then that’s what you’ll end up with.  It’s gonna be nice and tight what a lot of people do is they just want to bend a little sheets hook on that stick it around the screw and tighten it down. That does work but when you stick it in the hole in putting around the screw if something strips out or goes wrong with that screw chances are you’ve still got a relatively good connection right there.

So we’ll get a couple of these put together and then go to the next stage.
A little addendum I put one in and then I undid it just to show you how that wire ends up looking. See all that looks that I mean it goes in your sort of ways but we’re talking twisting it around and that’s why these things stay relatively tight.
If you are not sure get the help of a commercial electrician.
Once you’ve tighten that down what this doesn’t work well with is stranded wire and so for these types of applications when we’re making the pigtails we really want to make that solid.

Basically the way it works is you know everything is color-coded with us so you know once the box gets bolted to whatever it’s going to go to here we use self-tapping screws by attaching this to the faceplate on commercial installations has to be all three you know.

If it’s the do-it-yourselfer at home thing you’re actually in pretty good shape with just the center one requires a little bit of modification so it fits.

The other thing on a commercial box this is on a store display yes it’s a 4-inch box with only a single wide it gives us plenty of room for these wider longer wires and everything

Categories: News

How to fix the shingles in your Toronto Roof

No Comments

How to fix the shingles in your Toronto Roof

If you leave in Toronto, you’re subject to heavy storms you run the risk of the wind taking off a couple of shingles.

I’m going to show you how easy it is to put in the back on.
Had a storm yesterday they notice this morning a couple of shingles were off.
Fortunately didn’t rip the shingles to just pop them off the nails.
I’m gonna reuse these shingles.

If you need to replace shingles hopefully if you had your roof done you have some extras the first thing you need to remember when you’re doing a repair like this is if you have the slightest apprehension about good and getting up on your roof and being off to ground.

You need to hire a toronto roofing company to fix this for you but I’m comfortable with it.
I’ve done it a lot so let me bring in and I’ll show you how easy it is to fix this and your toronto roof will be watertight in no time.
So it just ripped the shingles off the nails I’m not gonna pull the nails out because that’ll make it that’s just another hole that has to be fixed.
What I am gonna do is just clean out any crap around them just hit it with a little roofing caulk underneath just to kind of seal that nail hole probably not completely necessary and then just drive in those nails.

I’m just gonna put a couple staples in the tar paper then the tar paper is actually what makes your house watertight. If you actually didn’t have shingles on your roof but you had the felt paper down your watertight so you don’t really have to worry about that roof shingles go on from bottom up.

I’m just gonna line up my first shingle with the previous course and I’m just gonna drive a few nails.

I’m not going to go through the same holes but you see this line of the tar that’s where you want to put your nails and it’s just about an inch and a half or so.


I’m gonna put four per single so before I put the second course on I’m just going to put a couple dabs of the roofing caulk where the old hole was that way you’ll get a seal and then I’m also going to go underneath & put a couple dabs for this course as well.

I just line up the next course I got to tuck it up under your shingles where I need to in this last one I just pull the flap up and then a couple dabs.

The last thing I have to do is just cut it to length tuck it up and I’m back in business.

So, repairing this roof wasn’t that difficult I would say the hardest part about this project is just climbing the ladder and getting on the roof but if you’re comfortable with Heights and climbing onto your roof you can do this project.

Categories: News